Contact Us
+86 755 8267 3328
info@industcom.com
industcom.com

GSM Emergency system

Outdoor ET phone set is using GSM module to make voice connection back to control centre.
Details
GSM Signal Emergency Telephone System
Application: EXPRESSWAY, SPEEDWAY, HIGHWAY, ROADSIDE, STREETSIDE, PARK, SCHOOL, ETC


OUTDOOR PHONE SET

Network Interface: GSM Frequency: 850/900/1800/1900MHZ, 2G, 3G,CDMA, WCDMA, EV-DO
Main body with whole stainless steel body, solid and temperature bearable.
Handset free, loudspeaker.
One button speed dial call, upon press of call button, it will call control room only.
Heavy duty Vandal resistant buttons.
Built-in keypad for program speed dial number. Or you can set hot line call by PABX.
Resume lightning proof protection automatically standard to ITU-T K21.
Waterproof grade about IP66.
The metal shell is provided with grounding connection device and is absolutely insulated with inner circuit and electric, then has the effect of electromagnetism shield.
Support hotline call, can realize ring off automatically if the other side close.
Totally adopt SMTC craftwork keep very good quality.
The design is super thin and smart. Embed style and hanging style can be chosen.
Every call is limited (set by five minutes), auto ring off if time exceeded.
Power Supply: Re-chargeable Battery powered: 9V/14Ah, Solar backup: 12V/30W
Built-in battery standby up to 21 days.
Built-in battery talking time up to 56 hours.

GSM VOIP GATE-WAY

Interfaces
Mobile Ports: 1 ports GSM channels
LED Indicators: Power, Run, Signal strength indicator
Voice Processing
Voice Packet Capabilities: G.168 with 32, 64 or 128 ms tail length
Voice Codec: G.711a/u law, G.723.1, G.729AB
QoS: Diff Serve, ToS, VAD, PLC, CNG
Call Features
Calling Type: Terminate/Originate calls
IVR Voice Prompt: Two stage dialing, Private service IVR
Call handling: One stage dialing, configurable dial plan
DTMF: RFC2833, SIP, INFO
Routing rules: Port Group, IP Group, up to 32 routing rules
Mobile Features
General Feature: SMS/SMSC, USSD, IMEI/PIN modify, Call
minutes restriction, Carrier select, BCCH, Re-versed Polarity
Network
Network Mode: NAT router or switch mode
Network Protocols: IP,TCP, UDP,TFTP, FTP, RTP, RTCP, ARP,RARP,ICMP Ping, NTP, SNTP, Http, DNS, PPPoE, DHCP
NAT traversal: Static NAT, STUN
Protocol
Protocol: SIP V2.0 RFC3261
SIP Characteristics: By port/device registration, Two 183 mode
Configuration Management
Management: TFTP, HTTP, System log, CDR
Web GUI: Configuration, firmware upgrade, call status, Configuration backup/restore

IP COMMUNICATIONS SERVER
The IP communications server uses standard server based hardware which can be upgraded to increase capacity. High availability feature is available to minimize downtime and increase utilization.
WEVO is all in one box. It contains all the telephony features in a box such as IPPBX, CDR, CTI, ACD and Call Recording. Operator can utilize the web operator panel for call monitoring and transfer.
Since it using IP based solutions, it can be integrated with internet VOIP providers.
Feature and Function
• Record telephone conversations into PC Hard Drive for easy retrieval, playback and storage
• Search recordings by Date, Time, Dialed number, caller ID, Extension & remarks
• Stores conversations and recordings in high quality sound format
• Playback recordings and telephone conversations easily via local LAN or WEB browser
• Recording on Demand, Voice Detection trigger recording, ON / OFF hook trigger recording
• Support DTMF and Incoming Caller ID
• Support RAID 1 (Disk Mirroring) for Data Redundancy
• User friendly Graphic User Interface (GUI) for easy operation


SOLAR PANEL & CONTROLLER
Solar Controller Model SCM-10A/12/24V
Total charging electric current 10A
Total load current 10A
System Voltage 12V24V/12V AUTO48V
Overload and protection of short
circuit
1.25 times rated current 60 seconds. 1.5
times rated current 5 seconds overload
protection
Open circuit loss ≤2.8 mA
Charging loop pressure drop ≤0.26V
Discharge circuit pressure drop ≤0.15V
Overpressure protection 9.5V×2/24V, X4/48V
Working temperature Industrial grade-35to +55
Ascension recharging voltage 8.4V×2/24V, X4/48V (Hold time
55min)
Straight charge voltage 8.4V×2/24V, X4/48V(Hold time
55min)
Boosting 8.4V×2/24V, X4/48V
Charging to return to voltage 8.4v×2/24V, X4/48V
Temperature compensation -4.5mv//2V
Owe pressure voltage 6V×2/24V, X4/48V
Discharge voltage 5.5 V discharge rate compensate the
initial discharge
voltage (no-load voltage)
 
SOLAR PANEL
Inspection standard AM1.5,1000W/Square meters
Measurement methods Working current, voltage
Test temperature 25
Test tools The solar energy light simulation
equipment
Product material Solar toughened glass
Productive technology Glass laminated
Storage -30+60
Size 510mm*460mm*25
Battery piece types Battery piece 156 single-crystal battery
piece 18 series
Efficiency about photoelectric conversion Above 15%
Validation All material of solar panels is complied
with ROS standards
Specifications 12V30W
Open-circuit voltage 13.8V
Working voltage 12V
Short-circuit current 3.66A
Working current 3.33A

EMERGENCY TELEPHONE POLE AND SOLAR PANEL MOUNTING DESIGN